US catalogue
Creality / The printer collection
Creality K2 Plus is a desktop 3D printer that uses plastic filament from a spool. Its listed print space is 350 × 350 × 350 mm. It has an enclosure around the print area. Compare 2 documented US purchase packages, included equipment and material requirements.
No community reviews yet.
At a glance
Review due. Check the current source before buying.
X × Y × Z. Object orientation and slicing still matter.
Review due. Check the current source before buying.
An enclosure is not a claim of active chamber heating.
Review due. Check the current source before buying.
Material suitability also depends on the printer and feeding path.
What you buy
These packages share the same printer. Check the included equipment and assembly needed before choosing a version.
Display attachment and startup calibration are required.
Review due. Check the current source before buying.
Select: K2 Plus (without CFS); no add-ons
View at Creality US Store — Creality K2 Plus — printer only; opens in a new tabThe link may open several packages. Check current price and availability with the seller. Opens in a new tab.
One standard CFS; four spool positions. The advertised 16-color maximum requires three additional CFS units. The complete cable and adapter list, and the parts needed to add a feeder to a printer-only package, have not been verified.
Review due. Check the current source before buying.
Select: K2 Plus+CFS*1; not the CFS*2 or CFS*4 package
View at Creality US Store — Creality K2 Plus — one-CFS Combo; opens in a new tabThe link may open several packages. Check current price and availability with the seller. Opens in a new tab.
The table uses Creality K2 Plus — printer only. Switch packages in the comparison tool to inspect bundle differences.
These are manufacturer specifications and seller package details. We have not independently tested the printers. Open a source to see the original page, when it was checked and how it was retrieved.
“Not verified” means we cannot confirm the value. “Sources disagree” means the available sources conflict. Neither should be read as a confirmed no or zero. “Not applicable” means the field does not apply to that option.
A source-check date records when the evidence was reviewed. It does not confirm today’s price or stock. Search-engine copies of official pages may be older than the seller’s current offer.
Open a field explanation or source for its conditions.
| Compare the details | Creality K2 Plus — printer only |
|---|---|
| What you buy | |
Purchase optionThe version or bundle you buy. The same printer may be sold alone, with a feeder, or as a kit. Match the option at checkout. Check what each box contains before comparing prices, especially when the model names look alike. | K2 Plus (without CFS); no add-onsSource · 2026-09-09Creality: K2 Plus US store packagesChecked 2026-09-09. We read the original webpage on the check date.Review due. Check the current source before buying. |
| External rating | |
Assembly neededHow much you need to put together. A kit needs assembly; an assembled printer may still need some setup and checks. Look through the maker’s assembly guide. Check the tools and steps, then decide whether you want to do that work before your first print. | preassembled setup requiredUnpacking, accessory attachment and calibration may still be required.Source · 2026-09-09Creality: K2 series product comparison and setupChecked 2026-09-09. We read the original webpage on the check date.Review due. Check the current source before buying. |
Automatic feeder includedA device that feeds filament—the plastic strand used for printing—from one or more spools. Spool slots tell you how many it holds for automatic selection. Check which materials the feeder accepts. A printer may handle a material that its feeder cannot. Extra feeders or adapters may cost more. | None — manual spool pathSource · 2026-09-09Creality: K2 Plus US store packagesChecked 2026-09-09. We read the original webpage on the check date.Review due. Check the current source before buying. |
What comes in the boxThe equipment and accessories included with this purchase option. Look for the feeder, print surface and other parts you expect. Check the seller’s full packing list before buying: this summary may leave out small parts, tools or extras. | Display attachment and startup calibration are required.This is a summary, not the complete packing list.Source · 2026-09-09Creality: K2 Plus US store packagesChecked 2026-09-09. We read the original webpage on the check date.Review due. Check the current source before buying. |
| Size and enclosure | |
Printable size · X × Y × ZThe largest print space the maker lists, measured side-to-side, front-to-back and in height, in millimetres. Check all three measurements against the objects you want to make. Leave room for any supports added when preparing the print. A larger print area fits larger objects; it does not promise better print quality. | 350 × 350 × 350 mmSource · 2026-09-09Creality: K2 series product comparison and setupChecked 2026-09-09. We read the original webpage on the check date.Review due. Check the current source before buying. |
Enclosed printerAn enclosure is a cabinet around the printer. Check which filaments the maker recommends and whether ventilation is needed. A cabinet alone does not make every material suitable or the air safe to breathe. Check the heating row separately if your filament needs a warm printing area. | YesSource · 2026-09-09Creality: K2 series product comparison and setupChecked 2026-09-09. We read the original webpage on the check date.Review due. Check the current source before buying. |
How the printing area is heatedHow the air around the print stays warm. A cabinet may hold heat from the print bed, use a separate heater, or control airflow with fans and vents. Check what your chosen filament needs. “Temperature controlled” does not always mean a separate heater is included. Ask the maker if the method is unclear. | active chamber heaterSource · 2026-09-09Creality: K2 series product comparison and setupChecked 2026-09-09. We read the original webpage on the check date.Review due. Check the current source before buying. |
Printer size · W × D × HThe width, depth and height of the printer body, in millimetres. Measure your desk or shelf, then check the space needed while printing below. These dimensions may leave out an open door, moving bed, cables, spool or separate feeder. | 495 × 515 × 640 mmManufacturer product dimensions; excludes any claim about operating clearance or accessory placement.Source · 2026-09-09Creality: K2 series product comparison and setupChecked 2026-09-09. We read the original webpage on the check date.Review due. Check the current source before buying. |
Space needed while printingThe room the printer needs to move, open and be used, beyond the size of its body. Check the setup instructions before choosing a desk or shelf. Allow access for loading filament and removing prints. If this measurement is missing, ask the maker; the body size alone is not enough. | Not verifiedWe have not verified this value. It is not a confirmed no or zero. Check the original source or ask the manufacturer if it affects your choice. |
| Printing hardware | |
Included nozzle materialWhat the included nozzle is made from. The nozzle is the small outlet that lays down melted filament. Check your filament’s nozzle requirements. Filament containing carbon, glass or other abrasive fillers may need a harder, wear-resistant nozzle. Budget for a replacement if the included one is unsuitable. Prusa guide to abrasive composite filaments | hardened steelSource · 2026-09-09Creality: K2 Plus support specificationsChecked 2026-09-09. We read the original webpage on the check date.Review due. Check the current source before buying. |
Maximum nozzle temperatureThe hottest the maker says the nozzle can run, in degrees Celsius. Check the temperature range on your chosen filament. Also check that the printer, nozzle and feeder support it. A higher maximum is useful only when you need it; it does not mean better prints. Prusa filament material guide | 350 °CSource · 2026-09-09Creality: K2 Plus support specificationsChecked 2026-09-09. We read the original webpage on the check date.Review due. Check the current source before buying. |
Maximum print-bed temperatureThe hottest the platform beneath the print can get, according to the maker, in degrees Celsius. Check the bed temperature and print surface recommended for your filament, plus any enclosure requirements. The maximum temperature alone cannot tell you how well a print will stick or turn out. Prusa filament material guide | 120 °CSource · 2026-09-09Creality: K2 Plus support specificationsChecked 2026-09-09. We read the original webpage on the check date.Review due. Check the current source before buying. |
Included print surfaceThe surface that holds the first layer of your print. Makers may also call it a build plate. Check that it suits your filament. Read how to prepare it and remove the finished print. You may need to buy a different surface for some materials. Prusa filament material guide | Not verifiedWe have not verified this value. It is not a confirmed no or zero. Check the original source or ask the manufacturer if it affects your choice. Source · 2026-09-09Creality: K2 series buying guideChecked 2026-09-09. We read the original webpage on the check date.Review due. Check the current source before buying. |
| Extras and open questions | |
Optional equipmentAccessories and expansion systems available for this printer. Some may already be included in your chosen bundle. Check the included feeder and box rows before buying extras. For anything you still need, check that it fits this printer, whether it needs adapters, and the total cost. | CFSUp to four CFS units / 16 spool positions advertised. Standard Combo includes one unit; extra units and any needed connection hardware are separate. Source · 2026-09-09Creality: K2 series product comparison and setupChecked 2026-09-09. We read the original webpage on the check date.Review due. Check the current source before buying. |
Questions to check before buyingMissing details, limits or disagreeing sources that could affect your choice. Open the source links or ask the maker about anything that matters for your plans. A missing answer means we could not confirm it. It does not mean something is wrong with the printer. | The buying guide incorrectly labels Pro/Plus as open-frame; the model product page confirms their heated enclosure. A manufacturer material list is not proof of all filament formulations or multi-material combinations. |
Printer guidance
These are the manufacturer’s stated material categories. A listed material is not a print-quality or safety test, and an automatic feeder has its own restrictions.
Manufacturer listed
Review due. Check the current source before buying.
Manufacturer listed
Review due. Check the current source before buying.
Manufacturer listed
Review due. Check the current source before buying.
Manufacturer listed
Review due. Check the current source before buying.
Manufacturer listed
Review due. Check the current source before buying.
Manufacturer listed
Review due. Check the current source before buying.
Manufacturer listed
CFS feeding can be unsuitable for brittle/stiff composites; check the exact filament.
Review due. Check the current source before buying.
Manufacturer listed
Review due. Check the current source before buying.
No community reviews yet.